“Teltonika FM3620 GPS tracker designed for asset tracking and Fleet Management telematic solutions. If you need to track real-time asset or fleet has installed FM3620 GPS tracker of Teltonika, need to register the FM3620 into a Tracking Management Platform via Web, FM3620 can also be configured to only send SMS alerts to a predefined phone, these alerts notify you of any new event generated by the device.

To Driving control in your asset or vehicle Teltonika FM3620 GPS tracker has 4 configurable scenarios: over speeding (secure driver and prevent penalties) scenario, trip start and end detection scenario, authorized driving (for Driver identification with iButton) scenario and immobilizer function scenario.

Teltonika offers 2 hardware modifications of this model for connecting external peripherals to the FM3620 GPS tracker: interfaces for C1 modification: 1 digital input, 1 universal input digital / analog and 2 digital outputs; interfaces for C2 modification: 1 universal input digital / analog, 1 interface 1-Wire and 1 digital output.

Apart from the hardware option to select the Teltonika FM3620 GPS tracker has an internal backup battery, 1 Internal USB port to configure the FM3620 or update the firmware (can be updated via OTA), external GSM antenna with SMA connector and external GNSS antenna with MCX connector.” – Teltonika

 

Interfaces

1-Wire interface Yes
Number of outputs 1
Number of inputs (all types) 2
ACC/Ignition input Yes
Supported
Discrete inputs Yes
Supported
Analog inputs Yes
Supported
Hardware extras
Driver ID reading Yes
Supported
External temperature sensor reading Yes
Supported
Tracking features
Tracking modes Continuous
Location by Cell ID Yes
Supported
ECO driving Yes
Supported
Events monitoring
Battery low Yes
Supported
External power cut off Yes
Supported
Self monitoring
Network signal level Yes
Supported
Network operator ID Yes
On request
Network roaming status Yes
Supported
GNSS signal level Yes
Supported
External power source voltage Yes
Supported
Internal battery level Yes
Supported
CAN/OBDII reading
CAN/OBDII reader type External
Supported
Remote management
Server connection setup over SMS Yes
Supported
Remote device configuration Yes (over GPRS)
Supported
Remote outputs control Yes
Forced GNSS location update over SMS Yes
On request

Leave a Reply

Your email address will not be published. Required fields are marked *

Fill out this field
Fill out this field
Please enter a valid email address.
You need to agree with the terms to proceed

Menu
Open chat