The GV50 Series (LTE) is a range of GNSS trackers designed for a wide variety of simple vehicle tracking applications, including vehicle finance asset protection, stolen vehicle recovery and simple fleet management. Vehicle trackers within the series support LTE CAT-M1 (eMTC) / LTE CAT-M2 (NB-IoT) on many bands suitable for North American and European Cellular Operators. The GV50 Series offers Bluetooth Low Energy 4.0 and basic digital I/Os that can be used for monitoring or controlling external peripherals.


Main Features:

*Small-sized, Ultra-thin Device Allowing Covert Installation

*Cost Effective Solution for Basic Tracking

*Multiple I/O Interfaces for Monitoring and Control

*Internal 3-axis Accelerometer for Motion Detection

*Driving Behavior Monitoring and Incident Notification

*GV50MA and GV50ME Sub-models Provide Optional Internal Bluetooth Version



LTE Specifications

Region: North America

Network/Operating Band: LTE eMTC, LTE B2/B4/B12/B13

Certificate: FCC/Verizon

Data Transmission: eMTC (DL) 375Kbp, eMTC (UL) 375Kbps


GNSS Specifications

GNSS Type: u-blox All-in-One GNSS receiver

Sensitivity: Cold start: -145 dBm, Tracking: -161 dBm

Position Accuracy (CEP50): Autonomous: < 2.5m

TTFF (Open Sky): Cold start: 30s average, Hot start: 1s average



Digital Input: 1 positive trigger input for ignition detection

Digital Output: 1 digital output, open drain, 150 mA max drive current

Digital Input/Output: 1 special I/O can be configured as a negative trigger digital input or an open drain output with 150 mA max drive current

Serial Port: 1 TTL UART port for upgrading and debugging

Cellular Antenna: Internal only

GNSS Antenna: Internal only

Bluetooth Antenna (Optional): Internal only

LED Indicators: CEL, GNSS

General Specifications

Dimensions: 87mm(L) x 55mm(W) x 12.5mm(H)

Weight: 50g

Backup Battery: Li-Polymer 190 mAh

Operating Voltage: 8V to 32V DC

Operating Temperature: -30℃~ +80℃, -40℃ ~ +85℃ for storage

Bluetooth (Optional): Support BLE 4.0 protocol


Air Interface Protocol

Transmit Protocol: TCP, UDP, SMS

Scheduled Report: Report position and status based on preset time intervals, distance, mileage or a combination of these settings

Geo-Fences: Geo-Fences

Power on Alarm: Report when the device is powered on

Tow Alarm: Alarm for tow event in ignition-off state

Driving Behavior Monitoring: Aggressive driving behavior detection, e.g. harsh braking and acceleration

Crash Detection: Accident data collection for reconstruction and analysis

Special Alarm: Special alarm based on digital inputs

Remote Control: OTA control of digital outputs


Optional Bluetooth Specifications

Frequency: 2.4 GHz RF transceiver compatible with Bluetooth low energy (BLE)

Receiver Sensitivity: Excellent receiver sensitivity -88 dBm

Max out RF Power: Up to 10 dBm

Optional BT Antenna: Internal only

Leave a Reply

Your email address will not be published. Required fields are marked *

Fill out this field
Fill out this field
Please enter a valid email address.
You need to agree with the terms to proceed

Open chat