The GV300 series includes two models designed for light duty vehicle applications. The series features multiple interfaces including one RS232 serial port, one smart input, a two-way audio interface, etc. to support a wide variety of external accessorie

Features:
  • Wide operating voltage range 8V to 32V DC
  • Internal u-blox chipset
  • Low power consumption, long standby time with internal battery
  • Quad band GSM/GPRS 850/900/1800/1900 MHz
  • Embedded full featured @Track protocol
  • Multiple I/O interfaces for monitoring and control
  • Internal 3-axis accelerometer supporting driving behavior monitoring, power saving and motion detection
  • Internal GSM antenna
  • Internal and external GNSS antenna
  • CE/FCC/E-Mark certified
Specification: 

General Specifications

Dimensions80mm(L) x 49mm(W) x 26mm(H)
Weight72g
Backup BatteryLi-Polymer, 250 mAh
Operating Voltage8V to 32V DC
Operation Temperature-30℃ ~ +80℃      -40℃ ~ +80℃ for storage  (GV300)

-30℃ ~ +70℃      -40℃ ~ +70℃ for storage  (GV300W)

 

GSM Specifications

Frequency

Quad band:  850/900/1800/1900 MHz

Compliant to GSM phase 2/2+

-Class 4 (2W @ 850/900 MHz)

-Class 1 (1W @ 1800/1900 MHz)

GPRS

GPRS multi-slot class 12 (10 by default)

GPRS mobile station class B

UMTS/ HSPA Specifications (GV300W)

FrequencyUMTS: 850/1900/2100 MHz

UMTS: Class 3 ([email protected]/1900/2100 MHz)

Data TransmissionHSDPA R5: Max 3.6Mbps (DL)

WCDMA R99: Max 384Kbps (DL)/Max 384Kbps (UL)

 

GNSS Specifications

GNSS Typeu-blox All-In-One GPS receiver
SensitivityAutonomous: -147 dBm

Hot start: -156 dBm

Reacquisition: -160 dBm

Tracking: -162 dBm

Position Accuracy (CEP)Autonomous: < 2.5m
TTFF (Open Sky)Cold start: 27s average

Warm start: 27s average

Hot start: 1s average

 

Interfaces

Digital Inputs

1 positive trigger input for ignition detection

2 negative trigger inputs for normal use

Configurable  Input1 special input can be configured as a negative trigger digital input or an analog input (0V-16V)
Analog Input1 analog input (0.3V-16V)
Digital Outputs2 digital outputs, open drain, 150 mA max drive current
Latched Digital Output1 digital output with internal latch circuit, open drain, 150 mA max drive current
Two-way Audio Interfaces

2 differential outputs

1 single end input

Cellular AntennaInternal only
GNSS AntennaInternal antenna and optional external antenna
LED IndicatorsCEL, GNSS, PWR
Mini USB InterfaceUsed for upgrading and debugging
Serial Port1 RS232 serial port on 16 pin molex type connector, for external devices (GARMIN protocol support)

 

Air Interface Protocol

Transmit ProtocolTCP, UDP, SMS
Scheduled ReportReport position and status based on preset time intervals, distance, mileage or a combination of these settings
Geo-fencesGeo-fence alarm and parking alarm, support up to 20 internal geo-fence regions
Low Power AlarmAlarm when backup battery is low
Power On ReportReport when the device is powered on
Tow AlarmAlarm for tow event in ignition-off state
Antenna Disconnect AlarmAlarm when external GPS antenna is disconnected
Driving Behavior MonitoringAggressive driving behavior detection, including harsh braking, acceleration, etc.
Crash DetectionAccident data collection for reconstruction and analysis
Special AlarmSpecial alarm based on digital/analog inputs
Remote ControlOTA control of digital outputs

 


Leave a Reply

Your email address will not be published. Required fields are marked *

Fill out this field
Fill out this field
Please enter a valid email address.
You need to agree with the terms to proceed

Menu
Open chat